A slow-ish week this week, not too much to update with.
First up, I've finished the suburbs (x3 and looking quite overgrown!) and Tom's home tile. I spent an evening or so drawing up the suburbs in Fusion 360 so that took a little longer than anticipated. The 'Gentlemen of the Apocalypse's (GotA (anagram of goat?!)) tile came out quite well - the file Tom linked actually had the band as a separate section so I could recess it slightly and add a splash of paint for contrast.
The rest of this week's efforts have gone on finishing up the frame and getting it onto the backing board and the 8 river tiles and associated bridges that run across the map. Printing the bridges was interesting! For reference the single span arch bridge has a length of 15mm, is 5mm wide and the arch is 0.5mm wide and peaks at 4mm above the bridge deck.
As you can see in the pictures below, I've put them in situ on the board with some of the highways and a forest tile. I need to sort out where the remaining forest tiles and highways go before commencing the campaign. I've also added the current completed home tiles in some of the home tile locations (although not our particular staring positions) just to give a feel of the layout.